译：WJ/Z 224-2014 Height and depth gauges - Type and dimensions - Double-marked depth gauge: D0 = 3mm to 50mm, L0 = 2mm to 102mm

译：WJ/T 2710-2014 Acceptance specifications for gold-cobalt alloy plating layers

译：WJ/Z 236-2014 WJ/Z 236-2014 Height and Depth Gauges - Types and Dimensions - Height Gauge L0=30mm～60mm

译：WJ/Z 230-2014 The type and dimensions of the height and depth gauges are as follows: Length gauges L0=3mm～500mm, D0=2mm～14mm, for gauges with L0≤80mm, D0=2mm～14mm, and for gauges with L0＜80mm

译：WJ/T 1461-2014 Screwdriver base and its components, right limit block

译：WJ/T 1454-2014 The vise base and its components and parts in combination with an eccentric wheel

译：WJ/T 1466-2014 The chuck and its components, cylinder block

译：WJ/T 854-2014 Cold stamping die typical combination diagonal guide bolt spring pressure ejector die (rigid)

译：WJ/T 1472-2014 Clutch base and its components, gasket and rubber bushing

译：WJ/T 1468-2014 clamp holder and its parts and components cylinder block

译：WJ/T 1465-2014 Clamping base and its zero and components, locating key

译：WJ/T 1447-2014 Clamp base and its components, including the fixed base

译：WJ/T 1450-2014 Holding base and its components, pressing plate

译：WJ/Z 240-2014 Height, Depth Gauge - Type and Size - Lever Type Depth Gauge - 0.06mm to 0.65mm

译：WJ/Z 239-2014 WJ/Z 239-2014 Height and Depth Gauges - Types and Dimensions - Lever Type Depth Gauge 0mm～10mm

译：WJ/T 1444-2014 Pneumatic one-way clamping chuck assembly and its components and parts

译：WJ/Z 232-2014 Height and depth gauges - Type and dimensions - Depth gauge L0=2mm~100mm

译：WJ/T 1445-2014 WJ/T 1445-2014 Clamping jaws for pneumatic double-acting clamps and its components

译：WJ/T 1462-2014 The collet and its zero components, left limit block

译：WJ/T 1442-2014 Manually operated one-way eccentric clamp jig and its components and parts