• JB/T 6758.2-2007 换位导线 第2部分:纸绝缘缩醛漆包换位导线 现行
    译:JB/T 6758.2-2007 Continuously transposed conductors-Part 2:Paper-insulated continuously transposed conductors of polyvinyl acetal enamelled copper wires
    【国际标准分类号(ICS)】 :29.060.01电线和电缆综合 【中国标准分类号(CCS)】 :K12带绝缘层电线
    发布单位或类别:(CN-JB)行业标准-机械 | 发布时间: 2007-03-06 | 实施时间: 2007-09-01
  • JB/T 10707-2007 热塑性无卤低烟阻燃电缆料 废止
    译:JB/T 10707-2007 Heat-resistant Flame-retardant PVC Non-halogenated Low-smoke Fiberless Cabling Material
    【国际标准分类号(ICS)】 :29.060.01电线和电缆综合 【中国标准分类号(CCS)】 :K12带绝缘层电线
    发布单位或类别:(CN-JB)行业标准-机械 | 发布时间: 2007-03-06 | 实施时间: 2007-09-01
  • JB/T 6758.1-2007 换位导线 第1部分:一般规定 废止
    译:JB/T 6758.1-2007 Replaced wire Part 1: General provisions
    【国际标准分类号(ICS)】 :29.060.01电线和电缆综合 【中国标准分类号(CCS)】 :K12带绝缘层电线
    发布单位或类别:(CN-JB)行业标准-机械 | 发布时间: 2007-03-06 | 实施时间: 2007-09-01
  • JB/T 6758.3-2007 换位导线 第3部分:无纸捆绑型缩醛漆包换位导线 废止
    译:JB/T 6758.3-2007 Replaced Conductor Part 3: Paperless Braid Type Acetal Coated Replaced Conductor
    【国际标准分类号(ICS)】 :29.060.01电线和电缆综合 【中国标准分类号(CCS)】 :K12带绝缘层电线
    发布单位或类别:(CN-JB)行业标准-机械 | 发布时间: 2007-03-06 | 实施时间: 2007-09-01
  • GB/T 6108.2-2003 绕组线基本尺寸 第2部分:漆包圆绕组线最大外径 废止
    译:GB/T 6108.2-2003 Basic dimensions of winding wires—Part 2:Maximum overall diameters of enamelled round winding wires
    【国际标准分类号(ICS)】 :29.060.01电线和电缆综合 【中国标准分类号(CCS)】 :K12带绝缘层电线
    发布单位或类别:(CN-GB)国家标准 | 发布时间: 2003-06-24 | 实施时间: 2004-02-01
  • GB/T 6108.1-2003 绕组线基本尺寸 第1部分:圆绕组线导体直径 废止
    译:GB/T 6108.1-2003 Basic dimensions of winding wires—Part 1:Diameters of conductors for round winding wires
    【国际标准分类号(ICS)】 :29.060.01电线和电缆综合 【中国标准分类号(CCS)】 :K12带绝缘层电线
    发布单位或类别:(CN-GB)国家标准 | 发布时间: 2003-06-24 | 实施时间: 2004-02-01
  • GB/T 6108.3-2003 绕组线基本尺寸 第3部分:铜扁绕组线导体尺寸 废止
    译:GB/T 6108.3-2003 Basic dimensions of winding wires—Part 3:Dimensions of conductors of insulated rectangular copper winding wires
    【国际标准分类号(ICS)】 :29.060.01电线和电缆综合 【中国标准分类号(CCS)】 :K12带绝缘层电线
    发布单位或类别:(CN-GB)国家标准 | 发布时间: 2003-06-24 | 实施时间: 2004-02-01
  • GB 18014-1999 电雷管引爆用聚氯乙烯绝缘电线 被代替
    译:GB 18014-1999 PVC insulated wires for ignition of electric detonators
    【国际标准分类号(ICS)】 :29.060.10电线 【中国标准分类号(CCS)】 :K12带绝缘层电线
    发布单位或类别:(CN-GB)国家标准 | 发布时间: 1999-11-11 | 实施时间: 2000-10-01
  • GB/T 4074.2-1999 绕组线试验方法 第2部分:尺寸测量 被代替
    译:GB/T 4074.2-1999 Test methods for winding wires—Part 2:Determination of dimensions
    【国际标准分类号(ICS)】 :29.060.01电线和电缆综合 【中国标准分类号(CCS)】 :K12带绝缘层电线
    发布单位或类别:(CN-GB)国家标准 | 发布时间: 1999-11-11 | 实施时间: 2000-05-01
  • GB/T 4074.4-1999 绕组线试验方法 第4部分:化学性能 被代替
    译:GB/T 4074.4-1999 Test methods for winding wires—Part 4:Chemical properties
    【国际标准分类号(ICS)】 :29.060.01电线和电缆综合 【中国标准分类号(CCS)】 :K12带绝缘层电线
    发布单位或类别:(CN-GB)国家标准 | 发布时间: 1999-11-11 | 实施时间: 2000-05-01
  • GB/T 4074.1-1999 绕组线试验方法 第1部分:一般规定 被代替
    译:GB/T 4074.1-1999 Test methods for winding wires—Part 1:General
    【国际标准分类号(ICS)】 :29.060.01电线和电缆综合 【中国标准分类号(CCS)】 :K12带绝缘层电线
    发布单位或类别:(CN-GB)国家标准 | 发布时间: 1999-11-11 | 实施时间: 2000-05-01
  • GB/T 4074.5-1999 绕组线试验方法 第5部分:电性能 被代替
    译:GB/T 4074.5-1999 Test methods for winding wires—Part 5:Electrical properties
    【国际标准分类号(ICS)】 :29.060.01电线和电缆综合 【中国标准分类号(CCS)】 :K12带绝缘层电线
    发布单位或类别:(CN-GB)国家标准 | 发布时间: 1999-11-11 | 实施时间: 2000-05-01
  • GB/T 4074.3-1999 绕组线试验方法 第3部分:机械性能 被代替
    译:GB/T 4074.3-1999 Test methods for winding wires—Part 3:Mechanical properties
    【国际标准分类号(ICS)】 :29.060.01电线和电缆综合 【中国标准分类号(CCS)】 :K12带绝缘层电线
    发布单位或类别:(CN-GB)国家标准 | 发布时间: 1999-11-11 | 实施时间: 2000-05-01
  • GB/T 4074.6-1999 绕组线试验方法 第6部分:热性能 被代替
    译:GB/T 4074.6-1999 Test methods for winding wires—Part 6:Thermal properties
    【国际标准分类号(ICS)】 :29.060.01电线和电缆综合 【中国标准分类号(CCS)】 :K12带绝缘层电线
    发布单位或类别:(CN-GB)国家标准 | 发布时间: 1999-11-11 | 实施时间: 2000-05-01
  • JB/T 4014.2-1996 潜水电机绕组线 第2部分:额定电压450/750V及以下聚乙烯绝缘尼龙护套耐水绕组线 废止
    译:JB/T 4014.2-1996 Submersible motor winding wire - Part 2: Polyethylene insulated nylon sheathed water resistant winding wire for rated voltages up to and including 450/750V
    【国际标准分类号(ICS)】 :暂无 【中国标准分类号(CCS)】 :K12带绝缘层电线
    发布单位或类别:(CN-JB)行业标准-机械 | 发布时间: 1996-09-03 | 实施时间: 1997-01-01
  • JB/T 4014.1-1996 潜水电机绕组线 一般规定 废止
    译:JB/T 4014.1-1996
    【国际标准分类号(ICS)】 :暂无 【中国标准分类号(CCS)】 :K12带绝缘层电线
    发布单位或类别:(CN-JB)行业标准-机械 | 发布时间: 1996-09-03 | 实施时间: 1997-01-01
  • JB/T 4014.3-1996 潜水电机绕组线 第3部分:额定电压600/1000V及以下交联聚乙烯绝缘尼龙护套耐水绕组线 废止
    译:JB/T 4014.3-1996 Submersible motor winding wire - Part 3: Waterproof winding wire with crosslinked polyvinyl chloride insulation and nylon cover for rated voltage up to and including 600/1000V
    【国际标准分类号(ICS)】 :暂无 【中国标准分类号(CCS)】 :K12带绝缘层电线
    发布单位或类别:(CN-JB)行业标准-机械 | 发布时间: 1996-09-03 | 实施时间: 1997-01-01
  • JB/T 4014.4-1996 潜水电机绕组线 第4部分:额定电压600/1000V及以下交联聚乙聚绝缘尼龙护套耐水绕组线 废止
    译:JB/T 4014.4-1996 Submersible motor winding wire - Part 4: Waterproof winding wire with crosslinked polyethylene insulation, nylon cover, rated voltage 600/1000V and below
    【国际标准分类号(ICS)】 :暂无 【中国标准分类号(CCS)】 :K12带绝缘层电线
    发布单位或类别:(CN-JB)行业标准-机械 | 发布时间: 1996-09-03 | 实施时间: 1997-01-01
  • MT 377-1995 电雷管用绝缘电线 废止
    译:MT 377-1995 Electrician use insulated wire for electric shock protection
    【国际标准分类号(ICS)】 :暂无 【中国标准分类号(CCS)】 :K12带绝缘层电线
    发布单位或类别:(CN-MT)行业标准-煤炭 | 发布时间: 1995-01-16 | 实施时间: 1995-05-01
  • JB/T 4279.5-1994 漆包绕组线试验仪器设备检定方法 急拉断试验仪 废止
    译:JB/T 4279.5-1994
    【国际标准分类号(ICS)】 :29.060.10电线 【中国标准分类号(CCS)】 :K12带绝缘层电线
    发布单位或类别:(CN-JB)行业标准-机械 | 发布时间: 1994-12-09 | 实施时间: 1995-06-01