GB/T 30844.1-2024 1 kV及以下通用变频调速设备 第1部分：技术条件
GB/T 30844.1-2024 Variable-frequency drive of 1 kV and below—Part 1:Technical conditions
基本信息
本文件适用于额定输入电压为交流1 kV以及直流1.5 kV等级及以下，额定输入频率为50 Hz或60 Hz，输出电压不大于1 kV，输出频率小于600 Hz的调速设备的设计、生产和安装。
注： 交流额定输入电压1 140 V或输出频率大于600 Hz的调速设备也通常参照本文件执行。有关的性能等要求由制造商和用户协商确定。
发布历史
-
2014年06月
-
2024年12月
文前页预览
研制信息
- 起草单位：
- 天津电气科学研究院有限公司、深圳市禾望电气股份有限公司、上海雷诺尔科技股份有限公司、苏州伟创电气科技股份有限公司、天水电气传动研究所集团有限公司、卧龙电气驱动集团股份有限公司、希望森兰科技股份有限公司、北京合康新能科技股份有限公司、新风光电子科技股份有限公司、深圳市英威腾电气股份有限公司、中信重工开诚智能装备有限公司、深圳市宝安任达电器实业有限公司、天津天传电控设备检测有限公司、北京ABB电气传动系统有限公司、西门子(中国)有限公司、北京利德华福电气技术有限公司、中冶赛迪电气技术有限公司、清华大学、深圳市科沃电气技术有限公司、英迪迈智能驱动技术无锡股份有限公司、东伟电气(广东)有限公司、山东联创高科自动化有限公司、东北电力大学、孚瑞肯电气(深圳)有限公司、奥大控股集团有限公司
- 起草人：
- 王春武、王素飞、陈国成、何承曾、张峰、朱鹏程、罗深、方茂成、尹彭飞、刘海威、关寒星、陆海峰、柴青、罗巨龙、陆文涛、嵇世卿、陈健、倪梅娟、温湘宁、许加春、姚坚、闫凤光、孙倩倩、李代豪、娄晶、李达兵、樊泽永、王瀛洲、程宏伟、金万春
- 出版信息：
- 页数：24页 | 字数：38 千字 | 开本： 大16开
内容描述
ICS29.240.99
CCSK46
中华人民共和国国家标准
GB/T30844.1—2024
代替GB/T30844.1—2014
1kV及以下通用变频调速设备
第1部分：技术条件
Variable⁃frequencydriveof1kVandbelow—
Part1：Technicalconditions
2024⁃12⁃31发布2025⁃07⁃01实施
国家市场监督管理总局
国家标准化管理委员会发布
GB/T30844.1—2024
目次
前言··························································································································Ⅲ
引言··························································································································Ⅳ
1范围·······················································································································1
2规范性引用文件········································································································1
3术语和定义··············································································································1
4额定值····················································································································3
4.1输入额定值········································································································3
4.2输出额定值········································································································3
5使用条件·················································································································3
5.1环境使用条件·····································································································3
5.2电气使用条件·····································································································5
6技术要求·················································································································5
6.1外观及结构检查要求····························································································5
6.2安全要求···········································································································6
6.3功能要求··········································································································10
6.4性能要求··········································································································11
6.5保护功能··········································································································13
6.6环境适应性·······································································································13
6.7防护等级··········································································································13
6.8电磁兼容性·······································································································14
6.9高低电压穿越能力······························································································14
7试验·····················································································································14
7.1通用要求··········································································································14
7.2型式试验··········································································································14
7.3出厂试验··········································································································14
7.4专门试验··········································································································14
7.5试验项目··········································································································14
8标志、包装、运输与贮存·····························································································15
8.1标志················································································································15
8.2包装················································································································16
8.3运输················································································································16
8.4贮存·············································································································16
参考文献····················································································································17
Ⅰ
GB/T30844.1—2024
前言
本文件按照GB/T1.1—2020《标准化工作导则第1部分：标准化文件的结构和起草规则》的规
定起草。
本文件是GB/T30844《1kV及以下通用变频调速设备》的第1部分。GB/T30844已经发布了以
下部分：
——第1部分：技术条件；
——第2部分：试验方法；
——第3部分：安全规程。
本文件代替GB/T30844.1—2014《1kV及以下通用变频调速设备第1部分：技术条件》，与
GB/T30844.1—2014相比，除结构调整和编辑性改动外，主要技术变化如下：
a）更改了文件的适用范围，将额定输入电压改为交流1kV以及直流1.5kV等级及以下（见第
1章，2014年版的第1章）；
b）删除了调速设备的分类（见2014年版的第4章）；
c）更改了“环境使用条件”有关的规定（见5.1，2014年版的6.1）；
d）更改了“正常电气使用条件”有关的规定（见5.2.1，2014年版的6.2.1）；
e）更改了“电气间隙和爬电距离的最小值”有关的规定（见6.2.3.3，2014年版的7.3.3.3）；
f）更改了“保护功能”有关的规定（见6.5，2014年版的7.14）；
g）增加了“高低电压穿越能力”有关的规定（见6.9）；
h）更改了“试验项目”有关的规定（见7.5，2014年版的8.5）；
i）更改了“调速设备铭牌标志”有关的规定（见8.1.1，2014年版的9.1）。
请注意本文件的某些内容可能涉及专利。本文件的发布机构不承担识别专利的责任。
本文件由中国电器工业协会提出。
本文件由全国变频调速设备标准化技术委员会（SAC/TC518）归口。
本文件起草单位：天津电气科学研究院有限公司、深圳市禾望电气股份有限公司、上海雷诺尔科技
股份有限公司、苏州伟创电气科技股份有限公司、天水电气传动研究所集团有限公司、卧龙电气驱动集
团股份有限公司、希望森兰科技股份有限公司、北京合康新能科技股份有限公司、新风光电子科技股份
有限公司、深圳市英威腾电气股份有限公司、中信重工开诚智能装备有限公司、深圳市宝安任达电器实
业有限公司、天津天传电控设备检测有限公司、北京ABB电气传动系统有限公司、西门子（中国）有限
公司、北京利德华福电气技术有限公司、中冶赛迪电气技术有限公司、清华大学、深圳市科沃电气技术
有限公司、英迪迈智能驱动技术无锡股份有限公司、东伟电气（广东）有限公司、山东联创高科自动化有
限公司、东北电力大学、孚瑞肯电气（深圳）有限公司、奥大控股集团有限公司。
本文件主要起草人：王春武、王素飞、陈国成、何承曾、张峰、朱鹏程、罗深、方茂成、尹彭飞、刘海威、
关寒星、陆海峰、柴青、罗巨龙、陆文涛、嵇世卿、陈健、倪梅娟、温湘宁、许加春、姚坚、闫凤光、孙倩倩、
李代豪、娄晶、李达兵、樊泽永、王瀛洲、程宏伟、金万春。
本文件及其所代替文件的历次版本发布情况为：
——2014年首次发布为GB/T30844.1—2014；
——本次为第一次修订。
Ⅲ
GB/T30844.1—2024
引言
GB/T30844《1kV及以下通用变频调速设备》旨在规范1kV及以下通用变频调速设备的技术条
件、试验方法、检验规则和安全规程等，拟由3个部分构成。
——第1部分：技术条件。目的在于给出1kV及以下通用变频调速设备的额定值、使用条件以及
技术要求。
——第2部分：试验方法。目的在于给出1kV及以下通用变频调速设备的试验方法。
——第3部分：安全规程。目的在于给出1kV及以下通用变频调速设备有关电气、热和能量等除
供电电源以外安全方面的要求。
Ⅳ
GB/T30844.1—2024
1kV及以下通用变频调速设备
第1部分：技术条件
1范围
本文件规定了1kV及以下的通用变频调速设备（以下简称“调速设备”）的额定值、使用条件、技术
要求、试验项目要求及标志、包装、运输与贮存。
本文件适用于额定输入电压为交流1kV以及直流1.5kV等级及以下，额定输入频率为50Hz或
60Hz，输出电压不大于1kV，输出频率小于600Hz的调速设备的设计、生产和安装。
注：交流额定输入电压1140V或输出频率大于600Hz的调速设备也通常参照本文件执行。有关的性能等要求由
制造商和用户协商确定。
2规范性引用文件
下列文件中的内容通过文中的规范性引用而构成本文件必不可少的条款。其中，注日期的引用文
件，仅该日期对应的版本适用于本文件；不注日期的引用文件，其最新版本（包括所有的修改单）适用于
本文件。
GB/T3797电气控制设备
GB/T4208外壳防护等级（IP代码）
GB/T4798.2环境条件分类环境参数组分类及其严酷程度分级第2部分：运输和装卸
GB/T4798.3—2023环境条件分类环境参数组分类及其严酷程度分级第3部分：有气候防
护场所固定使用
GB/T9969工业产品使用说明书总则
GB/T13384机电产品包装通用技术条件
IEC61800⁃3调速电气传动系统第3部分：PDS和机床的电磁兼容性要求及其特定的试验方
法（Adjustablespeedelectricalpowerdrivesystems—Part3：EMCrequirementsandspecifictestmethods
forPDSandmachinetools）
IEC61800⁃5⁃1：2022调速电气传动系统第5⁃1部分：安全要求电气、热和能量（Adjustable
speedelectricalpowerdrivesystems—Part5⁃1：Safetyrequirements—Electrical，thermalandenergy）
3术语和定义
下列术语和定义适用于本文件。
3.1
过载能力overloadcapability
在规定的工作条件下，能在规定的时间段内供给而不会超过规定限值的最大输出电流。
[来源：GB/T12668.2—2002，2.5.2，有修改]
3.2
电压不平衡voltageunbalance（imbalance）
在多相系统中所出现的各线电压的基波分量有效值或相邻相之间的相角差不完全相等的一种
1
定制服务
推荐标准
- QB 1780-1993 苯甲酸苄酯 1993-04-29
- JB 6317-1992 船用机电式控制电路继电器 1992-06-26
- QB 1706-1993 条纹牛皮纸 1993-04-15
- YY/T 0158-1994 压力蒸汽灭菌设备用密封垫圈 1994-02-28
- JB 7327-1994 常压固定床煤气发生炉通用技术条件 1994-07-18
- YY 0128-1993 医用X射线防护装置及用具 1993-07-01
- QB 1775-1993 丁酸异戊酯 1993-04-29
- YD/T 0837.3-1996 铜聚烯芯烃绝缘铝塑综合护套市内铜芯电缆试验方法 1996-04-04
- JB/T 2628-1992 电机用气体冷却器技术条件 1992-06-26
- JB 6213.4-1992 电机绕组引接软电缆和软线 第4部分 连续运行导体最高温度为180℃的软电缆和软线 1992-06-16