19 试验
65 农业
77 冶金
  • GB/T 11349.2-2006 振动与冲击 机械导纳的试验确定 第2部分:用激振器作单点平动激励测量 现行
    译:GB/T 11349.2-2006 Vibration and shock—Experimental determination of mechanical mobility—Part 2:Measurements using single-point translation excitation with an attached vibration exciter
    适用范围:本部分规定了用连接式激振器单点平动激励测量结构(如建筑物、机器和车辆)的机械导纳或其他频率响应函数的方法。 本部分适用于导纳、加速度导纳或位移导纳的测量,既可以是驱动点测量,也可以是传递测量。它还适用于确定这些比值的倒数,如自由有效质量。尽管采用单点激振,但可同时测量的运动响应的测点数目没有限制,例如,模态分析中要求的多点响应测量。
    【国际标准分类号(ICS)】 :17.160振动、冲击和振动测量 【中国标准分类号(CCS)】 :J04基础标准与通用方法
    发布单位或类别:(CN-GB)国家标准 | 发布时间: 2006-06-02 | 实施时间: 2006-11-01
  • GB/T 11349.1-2006 振动与冲击 机械导纳的试验确定 第1部分:本定义与传感器 被代替
    译:GB/T 11349.1-2006 Vibration and shock—Experimental determination of mechanical mobility—Part 1:Basic definitions and transducers
    适用范围:GB/T 11349的本部分界定了带注释的基本定义,并给出了为确定测量机械导纳所使用的阻抗头、力传感器和响应传感器的适用性,规定了必需做的校准试验、环境试验和物理测量。 GB/T 11349的本部分适用于各种类型的驱动点导纳和传递导纳、加速度导纳和位移导纳的测量。本部分不适用于约束阻抗(见4.3)的测量。 注:在不同情况下进行导纳测量的方法将在GB/T 11349.2和GB/T 11349.3中论述。
    【国际标准分类号(ICS)】 :17.160振动、冲击和振动测量 【中国标准分类号(CCS)】 :J04基础标准与通用方法
    发布单位或类别:(CN-GB)国家标准 | 发布时间: 2006-06-02 | 实施时间: 2006-11-01
  • GB/T 19875-2005 机械振动与冲击 固定结构的振动 在振动测量和评价方面质量管理的具体要求 废止
    译:GB/T 19875-2005 Mechanical vibration and shock—Vibration of stationary structures—Specific requirements for quality management in measurement and evaluation of vibration
    【国际标准分类号(ICS)】 :17.160振动、冲击和振动测量 【中国标准分类号(CCS)】 :J04基础标准与通用方法
    发布单位或类别:(CN-GB)国家标准 | 发布时间: 2005-08-31 | 实施时间: 2006-04-01
  • GB/T 19873.1-2005 机器状态监测与诊断 振动状态监测 第1部分:总则 现行
    译:GB/T 19873.1-2005 Condition monitoring and diagnostics of machines—Vibration condition monitoring—Part 1:General procedures
    【国际标准分类号(ICS)】 :17.160振动、冲击和振动测量 【中国标准分类号(CCS)】 :J04基础标准与通用方法
    发布单位或类别:(CN-GB)国家标准 | 发布时间: 2005-08-31 | 实施时间: 2006-04-01
  • GB/T 19847-2005 机械振动和冲击 评价机械系统冲击阻抗的分析方法 分析的提供者和使用者之间的信息交换 现行
    译:GB/T 19847-2005 Mechanical vibration and shock—Analytical methods of assessing shock resistance of mechanical systems—Information exchange between suppliers and users of analyses
    【国际标准分类号(ICS)】 :17.160振动、冲击和振动测量 【中国标准分类号(CCS)】 :J04基础标准与通用方法
    发布单位或类别:(CN-GB)国家标准 | 发布时间: 2005-07-11 | 实施时间: 2006-01-01
  • GB/T 19845-2005 机械振动 船舶设备和机械部件的振动试验要求 现行
    译:GB/T 19845-2005 Mechanical vibration—Vibration testing requirements for shipboard equipment and machinery components
    【国际标准分类号(ICS)】 :17.160振动、冲击和振动测量 【中国标准分类号(CCS)】 :J04基础标准与通用方法
    发布单位或类别:(CN-GB)国家标准 | 发布时间: 2005-07-11 | 实施时间: 2006-01-01
  • GB/T 19846-2005 机械振动 列车通过时引起铁路隧道内部振动的测量 现行
    译:GB/T 19846-2005 Mechanical vibration—Measurement of vibration generated internally in railway tunnels by the passage of trains
    【国际标准分类号(ICS)】 :17.160振动、冲击和振动测量 【中国标准分类号(CCS)】 :J04基础标准与通用方法
    发布单位或类别:(CN-GB)国家标准 | 发布时间: 2005-07-11 | 实施时间: 2006-01-01
  • GB/T 7031-2005 机械振动 道路路面谱测量数据报告 被代替
    译:GB/T 7031-2005 Mechanical vibration—Road surface profiles—Reporting of measured data
    【国际标准分类号(ICS)】 :17.160振动、冲击和振动测量 【中国标准分类号(CCS)】 :J04基础标准与通用方法
    发布单位或类别:(CN-GB)国家标准 | 发布时间: 2005-07-11 | 实施时间: 2006-01-01
  • GB/T 14412-2005 机械振动与冲击 加速度计的机械安装 现行
    译:GB/T 14412-2005 Mechanical vibration and shock—Mechanical mounting of accelerometers
    【国际标准分类号(ICS)】 :17.160振动、冲击和振动测量 【中国标准分类号(CCS)】 :J04基础标准与通用方法
    发布单位或类别:(CN-GB)国家标准 | 发布时间: 2005-05-13 | 实施时间: 2005-10-01
  • GB/T 13823.1-2005 振动与冲击传感器的校准方法 第1部分:基本概念 被代替
    译:GB/T 13823.1-2005 Methods for the calibration of vibration and shock transducers—Part 1:Basic concepts
    【国际标准分类号(ICS)】 :17.160振动、冲击和振动测量 【中国标准分类号(CCS)】 :N73机械振动、冲击设备与动平衡机
    发布单位或类别:(CN-GB)国家标准 | 发布时间: 2005-05-13 | 实施时间: 2005-10-01
  • GB/T 7094-2002 船用电气设备振动(正弦)试验方法 被代替
    译:GB/T 7094-2002 Vibration (sinusoidal) test method for electrical installations in ships
    【国际标准分类号(ICS)】 :17.160振动、冲击和振动测量 【中国标准分类号(CCS)】 :U04基础标准与通用方法
    发布单位或类别:(CN-GB)国家标准 | 发布时间: 2002-10-08 | 实施时间: 2003-04-01
  • GB/T 6075.2-2002 在非旋转部件上测量和评价机器的机械振动 第2部分:50MW以上陆地安装的大型汽轮发电机组 被代替
    译:GB/T 6075.2-2002 Mechanical vibration—Evaluation of machine vibration by measurements on non-rotating parts—Part 2:Large land-based steam turbine generator sets in excess of 50MW
    【国际标准分类号(ICS)】 :17.160振动、冲击和振动测量 【中国标准分类号(CCS)】 :J04基础标准与通用方法
    发布单位或类别:(CN-GB)国家标准 | 发布时间: 2002-05-20 | 实施时间: 2002-12-01
  • GB/T 6075.6-2002 在非旋转部件上测量和评价机器的机械振动 第6部分:功率大于100kW的往复式机器 被代替
    译:GB/T 6075.6-2002 Mechanical vibration—Evaluation of machine vibration by measurements on non-rotating parts—Part 6:Reciprocating machines with power ratings above 100kW
    【国际标准分类号(ICS)】 :17.160振动、冲击和振动测量 【中国标准分类号(CCS)】 :J04基础标准与通用方法
    发布单位或类别:(CN-GB)国家标准 | 发布时间: 2002-05-20 | 实施时间: 2002-12-01
  • GB/T 11348.5-2002 旋转机械转轴径向振动的测量和评定 第5部分:水力发电厂和泵站机组 被代替
    译:GB/T 11348.5-2002 Mechanical vibration of non-reciprocating machines—Measurements on rotating shafts and evaluation criteria—Part 5:Machine sets in hydraulic power generating and pumping plants
    【国际标准分类号(ICS)】 :17.160振动、冲击和振动测量 【中国标准分类号(CCS)】 :J04基础标准与通用方法
    发布单位或类别:(CN-GB)国家标准 | 发布时间: 2002-05-20 | 实施时间: 2002-12-01
  • GB/T 6075.5-2002 在非旋转部件上测量和评价机器的机械振动 第5部分:水力发电厂和泵站机组 现行
    译:GB/T 6075.5-2002 Mechanical vibration—Evaluation of machine vibration by measurements on non-rotating parts—Part 5:Machine sets in hydraulic power generating and pumping plants
    【国际标准分类号(ICS)】 :17.160振动、冲击和振动测量 【中国标准分类号(CCS)】 :J04基础标准与通用方法
    发布单位或类别:(CN-GB)国家标准 | 发布时间: 2002-05-20 | 实施时间: 2002-12-01
  • GB/T 6075.4-2001 在非旋转部件上测量和评价机器的机械振动 第4部分:不包括航空器类的燃气轮机驱动装置 被代替
    译:GB/T 6075.4-2001 Mechanical vibration—Evaluation of machine vibration by measurements on non-rotating parts—Part 4:Gas turbine driven sets excluding aircraft derivatives
    【国际标准分类号(ICS)】 :17.160振动、冲击和振动测量 【中国标准分类号(CCS)】 :J04基础标准与通用方法
    发布单位或类别:(CN-GB)国家标准 | 发布时间: 2001-02-26 | 实施时间: 2001-09-01
  • GB/T 6075.3-2001 在非旋转部件上测量和评价机器的机械振动 第3部分:额定功率大于15kW额定转速在120r/min至15000r/min之间的在现场测量的工业机器 被代替
    译:GB/T 6075.3-2001 Mechanical vibration—Evaluation of machine vibration by measurements on non-rotating parts—Part 3:Industrial machines with nominal power above 15kW and nominal speeds between 120r/min and 15000r/min when measured in situ
    【国际标准分类号(ICS)】 :17.160振动、冲击和振动测量 【中国标准分类号(CCS)】 :J04基础标准与通用方法
    发布单位或类别:(CN-GB)国家标准 | 发布时间: 2001-02-26 | 实施时间: 2001-09-01
  • GB/T 18328-2001 振动台选择指南 现行
    译:GB/T 18328-2001 Guidance for selection of vibration generator system
    【国际标准分类号(ICS)】 :17.160振动、冲击和振动测量 【中国标准分类号(CCS)】 :N73机械振动、冲击设备与动平衡机
    发布单位或类别:(CN-GB)国家标准 | 发布时间: 2001-02-26 | 实施时间: 2001-09-01
  • GB/T 18258-2000 阻尼材料 阻尼性能测试方法 被代替
    译:GB/T 18258-2000 Damping materials-Testing method for damping properties
    【国际标准分类号(ICS)】 :17.160振动、冲击和振动测量 【中国标准分类号(CCS)】 :J04基础标准与通用方法
    发布单位或类别:(CN-GB)国家标准 | 发布时间: 2000-11-21 | 实施时间: 2001-07-01
  • GB/T 17809-1999 阻尼材料 复模量图示法 现行
    译:GB/T 17809-1999 Damping materials—Graphical presentation of the complex modulus
    【国际标准分类号(ICS)】 :17.160振动、冲击和振动测量 【中国标准分类号(CCS)】 :Z32噪声、振动测试方法
    发布单位或类别:(CN-GB)国家标准 | 发布时间: 1999-08-11 | 实施时间: 2000-03-01